查干湖和新立城水库秋季水体悬浮颗粒物和CDOM吸收特性

分别于2012年9月对不同盐度水体的查干湖和新立城水进行水体野外采样和室内实验分析,通过测定颗粒物、CDOM等光学活性物质的吸收系数来对比分析两种水体的光学活性物质的吸收特性、来源及其在400~700 nm范围内对总吸收系数的贡献.结果表明,综合营养状态评价指数显示秋季查干湖、新立城水库水体属于中等富营养化,总悬浮颗粒物的吸收光谱表现均与色素类颗粒物吸收光谱相似.对于盐度较大的查干湖水体(EC=988.87μS·cm~(-1)),非藻类颗粒物占主导地位,各组分贡献率为非藻类颗粒物色素颗粒物CDOM;而盐度较低的新立城水库水体(EC=311.67μS·cm~(-1)),色素颗粒物贡献率略大于非藻类颗粒物贡献,各组分贡献率依次为:色素颗粒物非藻类颗粒物CDOM.查干湖总悬浮颗粒物吸收系数α_p(440)、α_p(675)和非藻类颗粒物吸收系数α_d(440)分别与TSM(总悬浮颗粒物)、ISM(无机悬浮颗粒物)和OSM(有机悬浮颗粒物)、Chl-a(叶绿素a)相关性均较好,相关系数在0.55以上;新立城水库α_p(440)、α_p(675)与Chl-a相关性较好(0.77和0.85,P0.05),α_d(440)与ISM具有相关性(0.74,P0.01),与OSM表现为负相关(-0.63,P0.05).查干湖CDOM吸收系数a_g(440)仅与OSM表现为负相关性(-0.54,P0.05),而新立城水库α_g(440)与其他参数均无相关性.通过对CDOM吸收曲线在250~400 nm的拟合所得到的S_g以及相对分子量M_r发现,查干湖的S_g[(0.021±0.001)m~(-1)]大于新立城的S_g[(0.017 6±0.001)m~(-1)],而CDOM的相对分子量M_r值分别为11.44±2.00(7.5~15.09)、7.53±0.79(6.17~8.89),查干湖M_r值高于新立城水库水体,表明查干湖CDOM组成较新立城水体中CDOM的分子量小,组成更趋向于小分子.查干湖受风速和湖岸坍塌的影响产生矿物悬浮、沉积微粒,水体颗粒物以非藻类为主,部分来自于浮游植物降解产物;新立城水库水体不仅有径流携带的陆源性无机物的输入,同时水体浮游植物生长减弱且微生物分解活动加强,降解有机颗粒物与非藻类吸收系数呈现负相关.     

基于元素毒性赋值的模糊数学环境质量评价

利用模糊数学方法，根据元素毒性的大小进行权重赋值，对成都经济区近地表大气尘进行地球化学环境质量评价。结果显示：不同城市中，成都、乐山、眉山的大气环境质量较好，处于一级清洁级别；眉山、雅安的大气环境质量处于二级安全级别；德阳的大气环境质量已经处于三级警戒级。不同地区中，绵阳和眉山的大气环境质量较好，处于一级清洁级别；德阳和雅安处于二级安全级别，成都和乐山处于三级警戒级.     

Thioarsenate formation upon dissolution of orpiment and arsenopyrite

Thioarsenates were previously determined as dominant species in geothermal and mineral waters with excess sulfide. Here, we used batch leaching experiments to determine their formation upon weathering or industrial leaching of the arsenic-sulfide minerals orpiment (As₂S₃) and arsenopyrite (FeAsS) under different pH and oxygen conditions. Under acidic conditions, as expected based on their known kinetic instability at low pH, no thioarsenates formed in either of the two mineral systems. Under neutral to alkaline conditions, orpiment dissolution yielded mono-, di- and trithioarsenate which accounted for up to 43-55% of total arsenic. Thioarsenate formation upon arsenopyrite dissolution was low at neutral (4%) but significant at alkaline pH, especially under suboxic to sulfidic conditions (20-43%, mainly as monothioarsenate). In contrast to orpiment, we postulate that recombination of arsenite and sulfide in solution is of minor importance for monothioarsenate formation during alkaline arsenopyrite dissolution. We propose instead that hydroxyl physisorption lead to formation of As-OH-S surface complexes by transposition of hydroxyl anions to arsenic or iron sites. Concurrently formed ironhydroxides could provide re-sorption sites for the freshly released monothioarsenate. However, sorption experiments with goethite showed slower sorption kinetics of monothioarsenate compared to arsenite, but comparable with arsenate. The discovery that thioarsenates are released by natural weathering and industrial leaching processes and that, once they are released, have a higher mobility than the commonly-investigated species arsenite and arsenate requires future studies to consider them when assessing arsenic release in sulfidic natural or mining-impacted environments.     

乌鲁木齐市可吸入颗粒物水溶性离子特征及来源解析

采暖期时在乌鲁木齐市采集了环境空气中的可吸入颗粒物,对可吸入颗粒物质量浓度及8种水溶性离子的特征和来源进行了分析。结果表明,细粒子和粗粒子的月平均质量浓度分别是53.5～233.3μg/m3和38.9～60.9μg/m3;细粒子和粗粒子中水溶性离子主要由SO24-、NH4+和NO3-组成;粗粒子中NH4+与NO3-和SO24-的相关性分别是0.70和0.66,细粒子中NH4+与NO3-和SO24-的相关性分别是0.89和0.93,铵盐是乌鲁木齐可吸入颗粒物主要存在形式;煤烟尘是乌鲁木齐市采暖期可吸入颗粒物的主要来源。     

电除尘器电源交流分量对PM_(2.5)等细微颗粒物除尘效率的影响

除尘器对颗粒物的除尘效率与颗粒物的荷电量密切相关,PM2.5等细小颗粒物由于其荷电量不足而导致其吸收效率较低,对环境造成危害。为了增加粒子的荷电量,以粒子荷电原理为理论依据,从离子电流密度和通过电凝并扩大尘粒中位径2个方面研究了电除尘电源中交流电压分量对PM2.5等细小颗粒物荷电特性的影响,得出了电除尘器电源中交流电压分量可从以上2个方面提高装置对PM2.5等微小颗粒物的荷电量,且频率越高,幅值越大,荷电效果越好,从而可以提高装置对细小颗粒物的除尘效率。     

非煤企业粉尘控制措施现状调查研究

采用典型抽样的方法选取5个非煤企业，对5个非煤企业的508例粉尘作业人员进行流行病学问卷调查，对20例工程技术人员及粉尘监测人员进行个人深入访谈。粉尘作业人员对粉尘危害预防的了解情况的正答率为84．62％，其中听过企业讲授粉尘危害及预防知识的比例为79．35％，知道工作环境中有人检测粉尘浓度的比例为77．42％。结论是非煤企业对生产性粉尘危害及预防知识的宣传力度不够；个人防护用品使用率低；粉尘作业人员对粉尘危害及基本防尘措施有一定程度的认识，但对国家相关法规认识程度较低；粉尘浓度监测可能存在漏洞。     

Potential effects of particulate matter from combustion during services on human health and on works of art in medieval churches in Cyprus

Indoor and outdoor particulate matter (PM_0.3-10) number concentrations were established in two medieval churches in Cyprus. In both churches incense was burnt occasionally during Mass. The highest indoor PM_0.5-1 concentrations compared with outdoors (10.7 times higher) were observed in the church that burning of candles indoors was allowed. Peak indoor black carbon concentration was 6.8 μg m⁻³ in the instances that incense was burning and 13.4 μg m⁻³ in the instances that the candles were burning (outdoor levels ranged between 0.6 and 1.3 μg m⁻³). From the water soluble inorganic components determined in PM₁₀, calcium prevailed in all samples indoors or outdoors, whilst high potassium concentration indoors were a clear marker of combustion. Indoor sources of PM were clearly identified and their emission strengths were estimated via modeling of the results. Indoor estimated PM_0.3-10 mass concentrations exceeded air quality standards for human health protection and for the preservation of works of art.     

Sulfamethoxazole sorption by sediment fractions in comparison to pyrene and bisphenol A

The environmental behavior of antibiotics has attracted great research attention. However, their sorption mechanisms in soils/sediments are still unknown. Comparison of the sorption properties between the widely-studied hydrophobic organic contaminants (HOCs) and antibiotics may provide valuable insight to antibiotic sorption mechanisms. Thus, in this study batch experiments for pyrene (PYR), bisphenol A (BPA), and sulfamethoxazole (SMX) sorption were conducted on a sediment sample and its separated fractions. Our results showed the high sorption of PYR on black carbon and organic matter. Although high sorption of SMX was observed for both separated organic fractions (humic acids) and inorganic mineral particles, the original sediment particles showed relatively low sorption. Competitive sorption between SMX and dissolved humic acid on mineral particles was observed in this study. This competitive interaction is a unique process for antibiotic sorption in soils/sediments compared with apolar HOCs and may be one of the important factors controlling the antibiotic sorption.     

Appraisal of measurement methods, chemical composition and sources of fine atmospheric particles over six different areas of Northern Belgium

Daily and seasonal variation in the total elemental, organic carbon (OC) and elemental carbon (EC) content and mass of PM_2.5 were studied at industrial, urban, suburban and agricultural/rural areas. Continuous (optical Dustscan, standard tapered element oscillating micro-balance (TEOM), TEOM with filter dynamics measurement system), semi-continuous (Partisol filter-sampling) and non-continuous (Dekati-impactor sampling and gravimetry) methods of PM_2.5 mass monitoring were critically evaluated. The average elemental fraction accounted for 2-6% of the PM_2.5 mass measured by gravimetry. Metals, like K, Mn, Fe, Cu, Zn and Pb were strongly inter-correlated, also frequently with non-metallic elements (P, S, Cl and/or Br) and EC/OC. A high OC/EC ratio (2-9) was generally observed. The total carbon content of PM_2.5 ranged between 3 and 77% (averages: 12-32%), peaking near industrial/heavy trafficked sites. Principal component analysis identified heavy oil burning, ferrous/non-ferrous industry and vehicular emissions as the main sources of metal pollution.     

药物混粉爆炸事故及防范对策的研究

从近几年制药行业频繁爆炸事故出发,分析制药行业爆炸事故的种类,从粉尘爆炸入手,以某制药企业为研究对象,对其爆炸粉体克拉维酸钾进行了爆炸参数测试,运用20L球形粉尘爆炸测试装置测定其爆炸下限为40g/m3。同时运用差热扫描热分析法对其进行放热反应进行研究,再利用毛细管气相色谱法对该混合物中是否存在可燃气体进行了评定,发现其存在丙酮可燃气体,但含量较低为9.3×10-5。针对上述特点,从技术和管理角度出发,分析应对措施以及常见的问题,设计了混粉机械人机界面,编制了安全检查表,对该类共性问题进行了归纳,以供防范药物混粉事故发生参考。